Change a Propane Tank
Propane powered forklifts are frequently utilized inside warehouses. The lift truck is designed with the propane tank mounted behind the operator. The tanks, that look a lot like beer kegs, have to be replaced periodically because they have a limited lifespan. Drivers of forklifts must utilize care when handling propane tanks. Compressed gases are dangerous, especially since the gas is flammable. Utilize care when replacing and removing propane tank to avoid being injured.
1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The forklift should be left on until the engine dies. This procedure burns the gas off in the transfer hose which connects the engine and the tank. Before taking the second steps, put on the correct safety equipment, such as insulated gloves made of either leather or neoprene. It is vital for you to protect your skin from touching the compressed gas, that is very cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When putting in a new tank, reconnect the holding straps and reattach the hose at the valve of the tank by tightening the nut.
3 Leaks can be inspected simply by applying soapy water to the valve and slightly opening it. If there is a leak, it would cause bubbles to froth from around the valve. If this happens, inspect the connection hose at the nut and the valve area. The connecting nut must be re-tightened if you detect any leaks around the area of the valve, and then do the leak inspection process once more. Persistent leaks mean that both the nut and connecting hose must be replaced. Then again, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Finally, open the valve all the way to enable the gas to fill the connecting hose. Afterward you can start the lift truck and continue working.